Filter
Top Products
4
Button Description For Audio
Operation
Press AUDIO device button to enable the
AUDIO MODE Audio functions indicated by
red printing.
LEVEL+/LEVEL-
Sets the level of the speakers during test tone
mode.
DSP ON•OFF
Enables the receiver’s Digital Sound
Processing Mode.
DSP MODE
When the DSP mode is enabled, pressing this
button allows the user to toggle through the
various DSP modes.
CD, TAPE, TUNER, TV, VIDEO
Used to directly select the device you want to
control. (Works in AUDIO mode).
AM•FM
The AM•FM button allows you to select the
AM•FM band on your audio receiver.
FUNCTION
Toggles the different audio input devices.
The number buttons also select the input
devices labeled below the buttons when in
AUDIO mode. function is also used to set
“learned” functions.
DELAY-, ON, DELAY+
Increases or decreases the delay between
the surround and main speakers when the
receiver is in the surround sound mode.
ON•OFF, SURR. MODE
Toggles the surround modes on and off.
SURR MODE toggles through the receiver’s
various surround sound mode settings.
FRONT, CENTER, REAR, TEST
Adjust the levels of the front, center, and rear
speakers respectively. The test tone must be
enabled first by pressing the TEST button.
PRESET
Used to operate preset channels while in the
AUDIO mode.