Filter
Top Products
24940 manual 8/19/03 9:04 AM Page 11
CABLE
BOX
CODE LIST
CABLE
Programming For Cable
1. Manually turn on the Cable Box. Find
the three digit code for your Cable Box at
the back of the instructions.
2. Press and hold the
CODE SEARCH button
until the INDICATOR
LIGHT lights, then
release the CODE
SEARCH button.
LIGHT
CODE
SEARCH
INDICATOR
3. Press and release the
CBL/SAT
CBL/SAT button (The
INDICATOR LIGHT
will blink then
(BLINK)
remain lit.
4. Enter the code using
the Number Buttons.
After your code is
entered, the INDICA-
(OFF)
TOR LIGHT will turn
off. If the code is not
valid, the INDICATOR LIGHT will blink.
Check the code list and repeat process.
1
2 3
4 5
6
7 8
9
0
5. Aim the remote at
your CABLE and press
ON•OFF
the ON•OFF button.
Your CABLE should turn
off.
CHAN +
6. With your Cable Box
on, press CHAN+
(CHANNEL UP). If the
Cable Box responds, no
further programming is required.
NOTE: If your Cable Box does not respond,
try all the codes for your brand. If the codes
do not work, or your brand is not listed, try
the Code Search method on Page 12.
7. Enter your
code here for easy
reference.
CABLE BOX CODE
10