Filter
Top Products
24940 manual 8/19/03 9:04 AM Page 7
SETUP
Programming For TV
Most GE, RCA and ProScan TVs will not
require programming. Check to see if your
TV responds to the remote before you begin
programming.
1. Manually turn on the TV. Find the three
digit code for your TV in the code list at the
back of the instructions.
2. Press and hold the
CODE SEARCH button
CODE
until the INDICATOR
SEARCH
LIGHT lights, then
release the CODE
INDICATOR
LIGHT
SEARCH button.
3. Press and release
the TV button (The
INDICATOR LIGHT
will blink then
remain lit.
4. Enter the code
using the Number
Buttons. After your
code is entered, the
INDICATOR LIGHT
will turn off. If the code
is not valid, the INDI-
CATOR LIGHT will
blink. Check the code
list and repeat process.
5. Aim the remote at
your TV and press the
ON•OFF button. Your
TV should turn off.
CHAN +
ON•OFF
1
2 3
4 5
6
7 8
9
0
(OFF)
(BLINK)
TV
NOTE: If your TV does not respond, try all
the codes for your brand. If the codes do not
work, or your brand is not listed, try the
Code Search method on Page 12.
6. With your TV on, press CHAN+
(CHANNEL UP). If the TV responds,
no further programming is required.
7. Enter your code
here for easy
reference.
TV CODE
6