Jensen AWM950 DVD Player User Manual


 
12
Installation:
1) Cut a mounting hole in the desired location using mounting hole diagram (below) and use the four
3x20min self tapping screws provided to mount the unit.
2) Route power, speaker and antenna cables through hole and connect to unit as outlined in the Wiring
Color Code diagram on the previous page.
3) After making sure connections are correct, test operation.
Specifications:
Operating Voltage: 11-16VDC
Output Power: 50 Watts Total (25 Watts per Channel)
Output Wiring: 2/4 speaker and Headphone System
Output Impedance: Compatible with 4-8 Ohm Speakers,
4 Ohm Load Min.
Tuning Range: (AM)530-1710 KHz
(FM) 87.5-107.9 MHz
Sensitivity (AM) less than 15uv
(FM) less than 2.5uv
FM Stereo Separation: More than 30dB
DVD Frequency Response: 20-20,000 Hz
DVD Channel Separation: 50dB
DVD S/N Ratio: 70dB
DVD Distortion: 0.2%
Size-
Overall Size: 10.43”(W)x7” (H)x6.26 (D)
265mm(W)x178mm(H)x159mm(D)
Mounting Size: 9.25”(W)x6.05”(H)x5.25”(D)
235mm(W)x154mm(H)x133mm(D)
Weight: 3.75 lbs.(1.7 Kg)
*Specifications are subject to change without notice.