Filter
Top Products
16 17
6. OSD (DTV) Settings: OSD (DTV) Settings:
First time installation
OSD operation tip
There are five main items on the
OSD menu and you can use ʳ˂ʳ ʳkeys
to select these main items. When you
select specific main item, and then the
related sub-items will be shown on
monitor, please useʳʳkeys and ʳ˂ʳ
keys to select sub-items. Almost all
sub-items have sub-function; you can
press ENTER key or key to enter
sub-function, and then use
ʳ˂ʳ ʳkeys
to switch sub- function. After your change, you can press ENTER key
your setting or just press MENU key to return to sub-items OSD
layer. Please
following chapters in order so you can see how to
operate our OSD menu.
specific
to see
At this menu, you can adjust the level settings related to the picture on TV.
Sub-Item Function description Operation Selection
Brightness:
To adjust the brightness
level of picture on TV.
(fig1.2)
ʳ
: increase the brightness level
: decrease the brightness level
0 ~ 100
Contrast:
To adjust the contrast level
of picture on TV. (fig1.3)
: increase the contrast level
: decrease the contrast level
0 ~ 100
Saturation:
To change the saturation
level on TV. (fig1.4)
: increase the saturation level
: decrease the saturation level
0 ~ 100
Hue:
To change the tint level of
picture on TV. (fig1.5)
ʳ
: increase the hue level
: decrease the hue level
ʳ
0 ~ 100
SPDIF Output:
To select digital audio
output format. (fig1.6)
/ : functions select
Dolby /
PCM / Off
Adjustment main-menu:
Using key and or key to select sub-items you want. Press ENTER
key or key to enter its sub-function and press MENU
Adjustment main-menu.
key to return
refer to the