Jensen VM9412 Flat Panel Television User Manual


 
15
VM9412
MULTI-ZONE OPERATION
Independent sources can be played simultaneously on the
VM9412. For example, a video game console can be seen on
the front screen while DVD video is available to rear
passengers.
Connecting the Rear Zone Touch Screen
You can connect up to two additional monitors (sold
separately) for rear passengers, one of which can be a Touch
Screen. You can also connect a wireless headphone system
to one of your rear monitors, as illustrated below.
Changing the Rear Zone Source
To access the SOURCE MENU, touch the TFT screen in the
top left corner of the screen.
This menu allows you to select a source for the front or rear
zone. Touch FRONT or REAR to choose the zone for which
you would like to specify the source.
Controlling the Rear Zone Screen(s)
If you have a rear touch screen installed, you can touch the
screen to control most rear zone functions.
NOTE: The rear zone volume can only be controlled from
the front.
You can also use the remote control. The VM9412 remote
controls both the front and rear zones. To switch from front to
rear zone, move the F/R switch (32) located on the right side
of the remote controller.
NOTE: You cannot change or control the front zone
source from the rear zone video screen.
Turning the Rear Screen Off
Touch the OFF button (on the SOURCE MENU) to suspend
operation of the rear screen. Any operation assigned
exclusively to the rear source will be suspended until
reactivated using either the front or rear zone touch screen or
the remote control.
YELLOW
BLACK
MZ7TFTTouchScreen
(Sold Separately)
WHITE
RED
Wireless Headphone
(OPTIONAL)
VIDEOOUT2
MZ-TFT
HEADPHONE
MULTIZONE
YELLOW
VIDEOOUT1
Rear Video Screen
(Sold Separately)
DISC
SOURCE MENU
DISC RADIO NAV
iPod
SAT CAMERA
AUX 1
AUX 2
OFF
F
R
O
N
T
R
E
A
R