1
1
DV1628
Owner's Manual
Thank you!
Thank you for choosing a JENSEN product. We ve tried to make the
instructions in this owner s manual clear and easy to follow. If you take a few
minutes to look through it, you ll learn how to use all of the features of your
new JENSEN AM/FM/CD/DVD player for maximum enjoyment.
Installation:
Getting Started.
It is a good idea to read all of the instructions before you begin the
installation.
Tools and supplies needed:
• Flat and Phillips screwdrivers
• Wire cutters and strippers
• Tools to remove existing radio
• Electrical tape
• Crimping tool
• Volt meter/ Test light
• Crimp connections
• Speaker Requirements: Only connect speakers rated in the load
impedance range of 4 Ohms. Speakers with a load impedance less
than 4 Ohms could damage the unit
1. Prepare:
• Disconnect battery. Before you begin always disconnect the
battery s negative terminal
2. Mounting angle:
• Do not exceed a 30¡ mounting angle. Improper operation of the
unit could occur if the mounting angle is exceeded.
3. Removal of factory radio or DV1628:
30
Installation...........................................................................................1
Troubleshooting..................................................................................3
Operation.............................................................................................4
Specifications......................................................................................16
Warranty.............................................................................................17