Filter
Top Products
5
5
1
15
2
4
5
6
7
9
10
12
13
16
14
17
18
11
29
8
19
CLK
SCN
RND D.DN D.UP
AS/PS
DSP
RPT
toggle between EQ settings, each press will toggle from
Flat, Classic, Pop, Rock, to off.
14. Angle: Allows the viewer to view the DVD at
different angles if the DVD is recorded with this feature.
Press the angle button while the DVD is Stopped. Then
press the
/ to adjust the brightness and contrast
levels.
15. Disp/Clock: Press to display the Clock or Disc
information. Setting the clock: Press and hold the
Disp/Clock button until the display begins to flash. Press
the #6
/ to adjust the hours or minutes.
16. Subtitle: Changes the subtitles language on the
DVD if the DVD is recorded with this feature.
17. Title: Displays the title that is stored on the
CD/DVD.
18. Setup: Displays the setup menu.
19. 0-9: Numeric key buttons.
20. M1-M6: Selects the Radio stations stored in the
memory.
21. Scan: Scans the entire disc and plays the first
10 seconds of each track.
22. Repeat: Replays the current disc or track.
23. Random: Plays the disc in random.
24. Disc- / Disc+: Chooses the CD/DVD, ( only if CDC or
DVDC is connected.
25. Reset: Reset button, press only if the unit is
locked up. This resets the unit to the factory settings.
26. Remote IR: Receiving sensor for the remote control.
27. Display: Main unit display
28. Eject: Eject the CD or DVD
29. Smart Mode / Disc: Press the Smart mode button to put the
unit into Smart mode. See Smart mode function. In DVD
changer mode ( Only if DVDC is connected ) press the button
to enter the Disc Menu.