Filter
Top Products
14
Remote control buttons and functions
AV-32/28R47SK / LCT1569-001A-U / ENGLISH
Choose a TV channel and
watch images from external
devices
• If the picture is tilted, correct it. See
“PICTURE TILT (Only for AV-
32R47SK)” on page 36.
Use the number buttons:
Enter the programme number (PR)
of the channel using the number
buttons.
Example:
•PR 6 → press 6
• PR 12 → press 1 and 2
Use the 6 buttons:
Press the
6 buttons to choose
the programme number (PR) you
want or an EXT terminal.
Use the o button:
Press the o button to choose
an EXT terminal.
• You can choose a video input signal
from the S-VIDEO signal (Y/C signal)
and regular video signal (composite
signal). For details, see “y (S-
VIDEO input)” on page 34.
• If you do not have a clear picture or no
colour appears, change the colour
system manually. See “COLOUR
SYSTEM” on page 24.
• If you choose an EXT terminal with no
input signal, the EXT terminal number
becomes fixed on the screen.
• This TV set has a function which can
automatically change over the input
according to a special signal output
from an external device. (The EXT-4
terminal does not support this
function.)
To return to a TV channel:
Press the b button, the 6 buttons or the
number buttons.
To use the programme number PR 0
(AV):
When the TV and VCR are connected only
by the aerial cable, choosing the programme
number PR 0 (AV) allows you to view
images from the VCR. Set the VCR RF
channel to the programme number PR 0
(AV) manually. For details, see “EDIT/
MANUAL” on page 29.
Pressing the o button changes the
choice as follows:
• The VCR sends its playback image along
the aerial cable as an RF (radio frequency)
signal.
• Also see your VCR instruction manual.
Adjust the volume
Press the 5 buttons to adjust the
volume.
The volume indicator appears and the
volume changes as you press the 5
buttons.
Muting the sound
Press the
l
(muting) button to
turn off the sound.
Pressing the
l
(muting) button again
restores the previous volume level.
EXT-1
EXT-4
EXT-2
EXT-3
TV mode EXT modes
Programme
numbers
PR 1 – PR 99
or
or
EXT-1
EXT-4
EXT-2
EXT-3
TV mode
EXT modes
Programme
numbers
PR 1 – PR 99
PR 0
or
or
AV-32&28R47SK_Eng.book Page 14 Thursday, February 26, 2004 2:41 PM