Filter
Top Products
48
Button Functions
When you change the aspect ratios, it is different from their broadcast or recorded program.
Aspect Ratios (Continued)
Press the ASPECT button
• By pressing the A
SPECT button, you can change the size.
Notes:
• You can also choose the size by pressing the
π†
buttons.
• When you change the aspect ratio or signal, reset the picture position to center.
• You can also access the "Front Menu" screen by using the M
ENU button on the front of
the TV instead of the remote control. It has "Input", "Video Status" and "Aspect" menus.
Choose "Aspect" by pressing M
ENU
†
on the front panel and choose a mode by using the
CHANNEL +/- buttons (
√
OPERATE
®
).
Receiving 4:3 signal
Aspect
4:3
16:9
Receiving 16:9 signal
Aspect
4:3
16:9
Zoom
ML/MTS
MTS technology allows several audio signals to be broadcast in analog at once, giving you a
choice in what you wish to hear with a TV program. In addition to mono or stereo sound, an
MTS broadcast may also include a second audio program (SAP).
Press the ML/MTS button
By every press of the ML/MTS button, you change the mode
Notes:
• When you are receiving a digital broadcast, if there are other languages, you can change the
language by pressing the M
L/MTS button.
• Keep the TV in stereo mode to get the best sound quality. The sound will work in stereo
mode even if a certain broadcast is in mono sound only.
• Choose the mono setting to reduce excessive noise on a certain channel or broadcast.
• Selecting SAP will allow you to hear an alternative soundtrack, if one is available.
• MTS unavailable if your television’s Input source is in input 1, 2 or 3 mode, as described on
page 43.
• You can also change the mode by pressing the
π†
buttons.
MTS
Stereo
SAP
Mono
LCT2033 "B" English.indd 48LCT2033 "B" English.indd 48 4/7/06 9:51:31 AM4/7/06 9:51:31 AM