JVC 0803-NIC-JMT CRT Television User Manual


 
5
Preparation
4 Connecting other devices
If you are not connecting any other devices, skip step 4 and perform step 5.
Use the headphones with a stereo mini jack (3.5 mm in diameter). When you connect the
headphones, the TV speakers go off.
The OUTPUT terminal outputs the video and sound signals which you are viewing on the
TV. You can dub them onto the VCR connected to the OUTPUT terminal.
(The OUTPUT terminal cannot output S-VIDEO signals or component video signals. Also it
cannot output any signals when the TV is turned off.)
Connect components outputting a component signal (Y/CB/CR signal), such as a DVD player,
to the VIDEO-2 terminal, and set VIDEO-2 SET function to “COMPONENT”. (See page 14.)
The following illustrations are for the AV-21V311/AV-21V331/AV-25V311/AV-25V331. Your
TV’s front and rear panels may not look exactly like the illustrations.
Front
Camcorder or TV game
Headphones
Rear
VIDEO-1
INPUT
OUTPUT
COMPONENT
(
VIDEO-2
)
INPUT
RRR
V
V
V
L
VCR (for playing)
VCR (for recording)
DVD player
(composite signals)
DVD player
(component video signals)
RC
R
V
Y
/
MONO
L
/
MONO
L
/
C
B
S
OVER
5 Connect the power cord to the AC outlet
Operate only from the power source indicated on the rear of the TV.
GGT0016-29V331-E401 22/08/2003, 15:38pm5