Filter
Top Products
Changing the Batteries
Raise the latch on the remote’s back cover to remove it.
Insert two AA batteries (supplied), carefully noting the "+" and "–" markings on the batteries
and on the remote control. To avoid a potential short circuit, insert the "–" end first. Be sure to
use only size AA batteries.
When batteries are installed, snap the cover back into place (until it clicks into position).
• If the remote control acts erratically, replace the batteries. Typical battery life is six months to
one year. We recommend using alkaline batteries for longer battery life.
Remote Control
17
Notes: Remote control model RM-C205 is shown at the left.
A different color remote control may have come with your
television.
Before you can operate the remote control, you must first
install the batteries (included). See “Changing the Batteries”
at the bottom of this page for instructions. (For an illustration,
please see page 10.)
Press the P
OWER
button to turn the television on or off.
Press the CH+ and CH– buttons to scan through the chan-
nels. Tap the CH+ or CH– button to move through the chan-
nels one channel at a time.
To move rapidly through the channels using JVC’s
Hyperscan feature, press and hold CH+ or CH–. The chan-
nels will zip by at a rate of five channels per second.
Press VOL+ or VOL– to raise or lower the volume. An indicator
bar will appear onscreen to show you the television volume
level.
The CH+/- and V
OL+/– buttons are also used to navigate
JVC’s onscreen menu system.
You can directly access specific channels using the 10-key
pad.
For more information on remote control button features, see
pages 37 to 39. For information on using the onscreen
menus, see page 18.
Remote Control Basics
•
•
•
•
•
•
•
•
FV5 English 3/12/02 2:49 PM Page 17