Filter
Top Products
16
Customized setting (continued)
VIDEO-2 SETTING
You can set the VIDEO-2 SETTING according to the video signal
output from the external devices connected to the VIDEO-2
terminal.
Select the VIDEO-2 SETTING in INSTALL menu, then choose a
setting (Factory setting is COMPONENT).
MENU INSTALL menu VIDEO-2 SETTING
VIDEO
If a normal video signal (composite video signal) is input.
COMPONENT If a component video signal (Y/C
B
/C
R
) is input.
You must choose a setting follow as signal that you input to VIDEO-2.
(If you input the VIDEO Signal or VCR Signal to VIDEO-2, you must
choose VIDEO-2 SETTING to VIDEO.)
For connecting methods, see “Additional Preparation” on page 18.
DISPLAY
You can display the program number and video terminal number
on the screen.
Press the DISPLAY button to display the indication on the screen.
SETUP TOUR
You may use the SETUP TOUR function to perform the initial setting.
When selecting SETUP TOUR, the AUTO PROGRAM menu and
CHANNEL SUMMARY menu will be displayed as shown on page
8. But “SETUP TOUR RESTART?” will not be displayed.
Select SETUP TOUR in the INSTALL menu.
MENU INSTALL menu SETUP TOUR
LANGUAGE
You can choose your desired on screen display language.
Select the LANGUAGE in the INSTALL menu, then choose a
language.
About the basic operations of the menu, please see the “How
to operate menus and menus locations” on page 5.
MENU INSTALL menu LANGUAGE
GGT0114-001A-H.indd 16GGT0114-001A-H.indd 16 23.01.2006 11:10:59 Uhr23.01.2006 11:10:59 Uhr