Filter
Top Products
29
ADDITIONAL MENU OPERATIONS
ENGLISH
AV29A10EU / LCT0984-001A-U / English
2
Press the
6
buttons to choose AUTO
PROGRAM. Then press the
a
button.
A COUNTRY menu appears as a sub-menu of the
AUTO PROGRAM function.
There are two COUNTRY menus. Pressing the yellow
button changes the COUNTRY as follows:
3
Press the
5
and the
6
buttons to
choose a country.
4
Press the
a
button to complete the set-
ting.
The menu disappears.
To return to the INSTALL menu from the COUNTRY
menu:
Press the
h
(Information) button instead of the
a
but-
ton.
■
■■
■
Using the DECODER (EXT-2)
Using the DECODER (EXT-2) Using the DECODER (EXT-2)
Using the DECODER (EXT-2)
function
functionfunction
function
When connecting a Decoder with a T-V LINK compatible VCR
connected to the EXT-2 terminal, use the DECODER (EXT-2)
function to unscramble the scrambled TV channels.
1
Turn on the Decoder power.
2
Display the TV channel capable of being
unscrambled with the Decoder on the TV.
Even if the Decoder is functioning, a scrambled picture
appears at this time.
3
Press the
a
button to display the MENU.
The MENU (main menu) appears.
4
Press the
6
buttons to choose FEA-
TURES. Then press the
a
button.
The FEATURES menu appears.
5
Press the
6
buttons to choose DECOD-
ER (EXT-2). Then press the
5
buttons to
choose ON.
An unscrambled picture appears.
To cancel the DECODER (EXT-2)function:
Press the
5
buttons to choose OFF.
6
Press the
a
button to complete the set-
ting.
The T-V LINK menu appears.
7
Follow the operating procedure “Down-
loading the data to VCR” on page 28 to
transmit the Programme number (PR) data
to the VCR.
8
If you have another TV channel capable of
being unscrambled with a Decoder, repeat
steps 2 through 7.
Note:
• If for some reason the DECODER (EXT-2)function
has been set to “ON” but the TV channel cannot be
unscrambled, check the following:
− Has the Decoder been connected to the VCR
properly according to the VCR and Decoder In-
struction Manuals?
− Has the Decoder power been turned on?
−
Can the TV channel be unscrambled with a De-
coder?
− Is it necessary to change the VCR settings in or-
der to connect the Decoder? Confirm that the
VCR is set properly by rechecking the VCR In-
struction Manual.
BACK
MORE
START
TV OK
BACK
MORE
START
TV OK
D0003-EN
D0023-EN
SLEEP TIMER
BLUE BACK
CHILD LOCK
DECODER(EXT-2)
OFF
OFF
ON
ON
BACK
FEATURES
TV OK
D0005-EN
BACK
DOWNLOAD TV VCR
T-V LINK
TV OK
EXIT
AV29A10EU_Eng.book Page 29 Tuesday, July 31, 2001 4:14 PM