JVC AV-32F734 CRT Television User Manual


 
Remote Programming
22
Cable/Satellite Search Codes Function
1) Slide the first 2-Way Mode Selector switch to CATV.
2) Press and hold down the P
OWER button, then press the RETURN+ button for more than three
seconds.
3) Release the RETURN+ button, then release the POWER button.
4) Press the POWER button on the remote, and see if the cable or satellite box responds.
5) If there was a response, press R
ETURN+. The codes are now set. If there was no
response, repeat Step 4. If you repeat Step 4 a total of 52 times without a response, use the
remote control that came with your equipment.
6) Press R
ETURN+ to exit.
VCR/DVD Search Codes Function
1) Slide the first 2-way selector switch to “TV” and the other 2-way selector switch to “VCR” or
“DVD”.
2) Press and hold down the VCR or DVD POWER button, then press the RETURN+ button for
more than three seconds.
3) Release the RETURN+ button, then release the VCR or DVD POWER button.
4) Press the VCR or DVD POWER button, and see if the VCR or DVD responds.
5) If there was a response, press RETURN+. The codes are now set. If there was no
response, repeat Step 4. If you repeat Step 4 a total of 80 times for the VCR (30 times for
the DVD player), and there is no response, use the remote control that came with your
equipment.
6) Press R
ETURN+ to exit.
Search Codes
734 English 22 8/27/03, 10:58:54 AM