Filter
Top Products
34
AV-32H35SAE / LCT1364-001A-U / English
Additional menu operations
Using the ACI function
This TV has an ACI function which decodes
the ACI (automatic Channel Installation)
data.
Using the ACI function allows all TV
channels transmitted from the cable TV
station to be properly registered quickly
according to the data from the cable TV
station.
Caution
• If your cable TV station broadcasts ACI
data and if “ACI START/ACI SKIP”
appears in the AUTO PROGRAM menu,
the ACI function is enabled. In all other
cases, it is disabled.
1 Press the 6
66
6 buttons to choose
ACI START. Then press the a
aa
a
button to start the ACI function
When you don’t want to use the ACI
function:
Press the 6 buttons to choose ACI
SKIP and then press the a button.
If the AUTO PROGRAM menu
changes to another menu:
Depending on your cable TV station,
there may be a broadcast selection menu
set up by the cable TV station.
Follow the menu indications and use the
5 and 6 buttons to operate the
menu. After you have made the setting,
press the a button.
If “ACI ERROR” is displayed in the
AUTO PROGRAM menu:
“ACI ERROR” denotes that the ACI
function is not working properly. Press
the a button to start the ACI function
again.
If “ACI ERROR” still appears even after
you have tried to start the ACI function
several times, press the 3 button to start
the AUTO PROGRAM function. It does
not cause any problem because all the TV
channels are registered to the Programme
numbers (PR) by the AUTO PROGRAM
function.
2 When the settings are completed,
the EDIT menu is displayed. Return
to the instructions that you were
reading before, and continue the
operation
When the “Initial settings” has
been made:
Return to step 6 of “Initial settings” on
page 6.
When the “AUTO PROGRAM” has
been made:
Return to step 4 of “AUTO PROGRAM”
on page 29.
• If you have any questions about the
items in the Broadcast Selection menu
or how to operate the menu, please
contact your cable TV station.
• When the cable TV broadcast
reception is poor, the ACI function
will not work properly.
• If there is an error in the ACI data
itself, the TV channel cannot be
registered properly. If this happens,
turn the ACI function off (ACI SKIP)
and use the AUTO PROGRAM
function. Alternatively, use the EDIT/
MANUAL function to correct the
Programme number (PR) setting.
AV-32H35SAE.book Page 34 Wednesday, March 12, 2003 4:29 PM