Filter
Top Products
9
Setting up your TV
4
Press the
3
33
3
button to start the
AUTO PROGRAM function
The AUTO PROGRAM menu appears and the TV
channels you receive are automatically stored in the
programme numbers list (PR).
To cancel the AUTO PROGRAM function:
Press the
4
44
4
button.
5
After the TV channels have been
registered in the programme numbers
list (PR), the EDIT menu appears
If you want to, you can now edit the programme numbers
(PR) using the EDIT/MANUAL function. For details, see
“EDIT/MANUAL” on page 26.
If you do not want to edit programme numbers (PR), go
to the next step.
6
Press the
3
33
3
button to display the
T-V LINK menu
7
Follow the T-V LINK menu according
to the type of VCR you have connected
to the EXT-2 terminal
If you do not have a T-V LINK compatible VCR
connected:
Press the
4
44
4
button to leave the T-V LINK menu.
The T-V LINK menu disappears.
If you have a T-V LINK compatible VCR
connected:
Follow the operating procedure “Downloading data to a
VCR” on page 30 to transmit the programme number
(PR) data.
8
Now, the initial settings are complete,
and you can watch the TV
Note:
• When your TV can detect the TV channel name from
the TV channel broadcast signal, it automatically
registers the TV channel name (ID) to the
Programme number (PR) in which the TV channel
has been registered.
• If a TV channel you want to view is not set to a
programme number (PR), you can set it using the
MANUAL function. For details, see “EDIT/MANUAL”
on page 26.
• The AUTO PROGRAM function does not set the
programme number PR 0 (AV) for your video
cassette recorder. You will need to set this using the
MANUAL function.
• In some areas you may get TV reception from more
than one transmitter, for example different ITV
regions. In this case each TV channel could be set
twice. If this happens, the first set of channels will
have the stronger signal. If you want to delete the
second set of channels, you will have to do it
manually (see page 28).
AV28S2EI_E1.fm Page 6 Thursday, December 21, 2000 1:59 PM