Filter
Top Products
BASIC OPERATION
ENGLISH
2 Press the
and
buttons to choose a
Programme number (PR). Then press the
button.
Note:
• For Programme numbers (PR) with the CHILD
LOCK function set, the
(CHILD LOCK) mark is
displayed next to the Programme number (PR) in
the PR LIST.
• You cannot use the
buttons to choose a Pro-
gramme number (PR) with the CHILD LOCK fun-
tion set.
• Even if you try to choose a Programme number
(PR) with the CHILD LOCK function set, the
(CHILD LOCK) mark will appear, and you cannot
watch the TV channel. To watch the TV channel,
see “CHILD LOCK” on page 21.
• If you do not have a clear picture or no colour ap-
pears, change the colour system manually. See
“COLOUR SYSTEM” on page 16.
• If the picture is tilted, correct it. See “PICTURE
TILT” on page 17.
■
■■
■
$
$$
$
%
%%
%
Press the
buttons to adjust the vol-
ume.
The Volume indicator appears and the volume changes as
you press the
–/+
buttons.
■
■■
■ &
&&
&
!
!!
!
'
''
'
%
%%
%
Choose an EXT terminal to which the desired external device
has been connected.
Use the
button:
Press the
button to choose an EXT terminal.
Pressing the
button changes the choice as follows:
Use the
buttons:
Press the
buttons to choose an EXT terminal.
Use the PR LIST:
1
Press the
(Information) button to
display the PR LIST.
2
Press the
and
buttons to choose an
EXT terminal. Then press the
button
.
Note:
• The EXT terminals are registered after the Pro-
gramme number PR 99.
• You can choose a video input signal from the S-VID-
EO signal (Y/C signal) and regular video signal
(composite signal). For details, see “(S-VIDEO
input)” on page 19.
• If you do not have a clear picture or no colour ap-
pears, change the colour system manually. See
“COLOUR SYSTEM” on page 16.
•
When choosing an EXT terminal with no input signal,
the EXT terminal number becomes fixed on the screen.
• This TV set has a function which can automatically
change over the input according to a special signal
output from an external device.(The EXT-4 terminal
does not support it.)
To return to a TV channel:
Press the
button, the
buttons or the Number but-
tons.
To use the Programme number PR 0 (AV):
When the TV and VCR are connected only by the Aerial
cable, choosing the Programme number PR 0 (AV) al-
lows you to view images from the VCR. Set the VCR RF
channel to the Programme number PR 0 (AV) manually.
For details, see “EDIT/MANUAL” on page 24.
Pressing the
button changes the choice as follows:
Note:
• The VCR RF channel is sent as the RF signal from
the VCR.
• Also refer to your VCR instruction manual.
EXT-1
EXT-4
EXT-2
EXT-3
TV mode EXT modes
Programme
numbers
PR 1 – PR 99
PR 0
EXT-1
EXT-4
EXT-2
EXT-3
TV mode
EXT modes
Programme
numbers
PR 1 – PR 99
WFT1EP_E1.fm Page 7 Monday, February 14, 2000 10:30 AM