12
Remote control buttons and functions
AV-32X4BA / LCT1674-001A-H / English
• You can choose a video input signal
from the S-VIDEO signal (Y/C signal)
and regular video signal (composite
signal). For details, see “S-IN (S-
VIDEO input)” on page 25.
• If you do not have a clear picture or no
colour appears, change the colour
system manually. See “COLOUR
SYSTEM” on page 21.
• If you choose an EXT terminal with no
input signal, the EXT terminal number
becomes fixed on the screen.
• This TV set has a function which can
automatically change over the input
according to a special signal output
from an external device. (The EXT-4
terminal does not support it.)
To return to a TV channel:
Press the b button, the 6 buttons or the
Number buttons.
To use the Programme number PR 0
(AV):
When the TV and VCR are connected only
by the Aerial cable, choosing the Programme
number PR 0 (AV) allows you to view
images from the VCR. Set the VCR RF
channel to the Programme number PR 0
(AV) manually. For details, see “EDIT/
MANUAL” on page 31.
Pressing the o button changes the
choice as follows:
• The VCR RF channel is sent as the RF
signal from the VCR.
• Also refer to your VCR instruction
manual.
ZOOM function
You can change the screen size according to
the picture aspect ratio. Choose the optimum
one from the following ZOOM modes.
AUTO:
For any picture format except Normal Picture
(4:3 Aspect Ratio), the picture will be
automatically displayed in the optimum
screen size.
For Normal Picture (4:3 Aspect Ratio), the
picture displayed in accordance with the
ZOOM mode set on the 4:3 AUTO ASPECT
menu. For details, see “4:3 AUTO ASPECT”
on page 22.
• AUTO may not function properly with
poor signal quality. In this case, choose an
optimum ZOOM mode manually.
• This TV supports WSS (wide-screen
signals). When broadcasts with WSS are
received with the ZOOM mode set at
AUTO, the most suitable ZOOM mode is
automatically chosen according to the
WSS received.
REGULAR:
Use to view a normal picture (4:3 aspect
ratio) as its original size is.
PANORAMIC:
This mode stretches the left and right sides of
a normal picture (4:3 Aspect Ratio) to fill the
screen, without making the picture appear
unnatural.
• The top and bottom of the picture are
slightly cut off.
TV mode
EXT modes
Programme
numbers
PR 1 – PR 99
PR 0
AV-32X4B_Eng.book Page 12 Monday, June 21, 2004 10:47 AM