JVC AV-21LS, AV-25LS, AV-34LS, AV-21LX, AV-25LX, AV-29LX, AV-29LX1, AV-34LX, AV-21LXB, AV-25LXB, AV-29LXB CRT Television User Manual


 
20
Attaching the Twin Port Bass
Blaster Unit
<AV-21LXB and AV-25LXB only>
The Twin Port Bass Blaster Unit is packaged together with the TV. Before you use the TV,
mount the Twin Port Bass Blaster Unit correctly on the TV.
Note:
The SUPER BASS functions do not work unless the Twin Port Bass Blaster Unit is connected correctly
to the TV. For details on the SUPER BASS functions, see page 9.
CAUTION:
The Twin Port Bass Blaster Unit is just placed on top of the TV and is not held in place by a screw.
When you use the Twin Port Bass Blaster Unit, pay attention to the following cautions. Otherwise, the
Twin Port Bass Blaster Unit or TV may fall over and be damaged, or cause unexpected injury.
- Do not rest your hands or elbows on the Twin Port Bass Blaster Unit.
- Do not move the TV with the Twin Port Bass Blaster Unit mounted on top of the TV. Before you move
the TV, be sure to remove the Twin Port Bass Blaster Unit.
- Do not move the TV by holding the Twin Port Bass Blaster Unit.
Twin Port Bass Blaster Unit
VIDEO-1
INPUT
OUTPUT
COMPONENT
(
VIDEO-2
)
INPUT
BASS
SPEAKER
OUT
RRRC
R
V
MONO
L
/
V
Y
/
V
L
MONO
L
/
C
B
1 Place the Twin Port Bass Blaster
Unit on top of the TV making sure
that the mounting pin on the
bottom of the Twin Port Bass Blaster
Unit fits into the mounting hole on
the top of the TV.
When you mount the Twin Port Bass Blaster
Unit, make sure that the mounting pin fits
properly into the mounting hole. Otherwise,
the Twin Port Bass Blaster Unit may slide off
the top of the TV. This may damage the Twin
Port Bass Blaster Unit or cause unexpected
injury.
2 Firmly insert the Twin Port Bass
Blaster Unit connector into the
BASS SPEAKER OUT terminal.
LCT0935-001C-H 9/20/1, 3:37 PM20
Black