Filter
Top Products
5
Preparation
4 Connecting other devices
If you are not connecting any other devices, skip step 4 and perform step 5.
• Use the headphones with a stereo mini jack (3.5 mm in diameter). When you connect the
headphones, the TV speakers go off.
• The OUTPUT terminal outputs the video and sound signals which you are viewing on the TV.
You can dub them onto the VCR connected to the OUTPUT terminal.
(The OUTPUT terminal cannot output teletext programmes, S-VIDEO signals or component
video signals. Also it cannot output any signals when the TV is turned off.)
• Connect components outputting a component signal (Y/CB/CR signal), such as a DVD player, to
the VIDEO-2 terminal, and set VIDEO-2 SET function to “COMPONENT”. (See page 16.)
• The following illustrations are for the AV-29LS. Your TV’s front and rear pannels may not look
exactly like the illustrations.
L/MONOVR
IN (VIDEO-3)
Headphones
Camcorder or TV game
VIDEO-1
INPUT
OUTPUT
COMPONENT
(
VIDEO-2
)
INPUT
RRR
V
V
V
L
VCR (for playing)
VCR (for recording)
DVD player
(composite signals)
DVD player
(component video signals)
RC
R
V
Y
/
MONO
L
/
MONO
L
/
C
B
5 Connect the power cord to the AC outlet
Operate only from the power source indicated on the rear of the TV.
Front
Rear
LCT0935-001C-H 9/20/1, 3:36 PM5
Black