Filter
Top Products
15
FUNCTIONS
TV channel presetting
To register the TV channels automatically
(AUTO PROGRAM)
You can register the TV channels automatically.
1
SET UP menuMENU AUTO PROGRAM
2
AUTO PROGRAM
OK / : EDIT
22%
or
3 to stop or when AUTO PROGRAM finishes.
4 The EDIT menu appears.
To edit the channel list Proceed to Step 2 of “To edit the channel list” on this
page.
If a channel is not
registered
Proceed to Step 3 of “To register the TV channels
manually” on this page.
To exit the menu Press the MENU button.
To register the TV channels manually
(MANUAL in the EDIT menu)
You can register the TV channels into the TVʼs channel list manually.
1
SET UP menuMENU EDIT/MANUAL
2
or
3 Choose the channel which you want to register.
4
(blue)
to activate the MANUAL function. (The sound system of
the channel appears at the right of the CH/CC number.)
5 to choose an appropriate sound system.
For details, see “SOUND SYSTEM”. \ Page 12
6
OR
(red) (green)
to search for the TV channel.
7 Searching stops when a channel is found and displayed.
If the reception is
poor
Press the yellow or blue button to fine tune the TV
channel.
If noisy sound is
heard
Press the 3 button to choose an appropriate sound
system.
8 to exit.
To edit the channel list
(MOVE, DELETE and INSERT in the EDIT menu)
You can edit the TV channel list as you like.
After this operation, other channelʼs PR number will be changed.
1 Repeat Steps 1 and 2 of “To register the TV channels manually
(MANUAL in the EDIT menu)”, \ see left.
2 Choose the channel which you want to change its PR number, or
delete, or register a new channel.
3
To change the
PR number
(MOVE)
Press the 3 button. Then move it to the new PR number
you want to use for the channel by pressing the 5/∞ button.
Finally press the 2 button.
To delete
the channel
(DELETE)
Press the yellow button.
To add the
new channel
(INSERT)
If you add a new TV channel of NTSC-M system, press the
SOUND SYSTEM button to change the sound system to M,
then select EDIT/MANUAL in SET UP menu. Press the green
button, then press the 3 button to choose “CC” or “CH”.
Enter the CH/CC number for the channel you wish to add.
The TV starts to search for the channel.
When a TV channel has already been registered in PR99,
using the INSERT function deletes that TV channel.
4 to exit.