JVC DR-MH300BE DVD Recorder User Manual


 
H EN
106
Q&A
Preparations
See AAbout DiscsB [P12].
No. This unit’s HDD contains software required for operations,
and will not function if replaced with a commercially available
HDD.
Use an RF converter sold separately. For details on connection,
refer to the instruction manual of the RF converter.
Setup
The HDD functions in the following instances even if the unit
is off.
0 While receiving programme listing data.
0 While HDD is being optimised.
The fan spins in the following instances even if the unit is off.
0 While receiving programme listing data.
0 During VPS/PDC recording standby.
0 When Setup Menu AL-2 SELECTB = ADECODERB
[ P103] l
Yes, this unit outputs signals from the [L-2 IN/DECODER]
terminal to the [L-1 IN/OUT] terminal even if it is off. See
AInput/Output SettingB [P34]
However, this function is not available during programme
listing data downloading. In such cases, it is recommended
that the external receiver be connected directly to the TV.
Recording
See AClock SettingB [P35].
No.
It will not be erased. Recording will stop.
Yes, on the DVD deck. However, it is not possible to switch to
DV input. Switching is not possible during DV input recording.
Unable to pause recording on the HDD. If PAUSE is pressed
while HDD is recording., it will enter into Live Memory
Playback’s pause mode. However, record pause is possible
during external input recording. (By pressing REC and PAUSE
on the remote control simultaneously.)
DVD-RW/-R (Video mode) recording will be recorded in the
sound as set. Setup Menu AVIDEO MODE RECORDING
AUDIOB [P100] N
When recording movies and other bilingual programmes, the
use of DVD-RAM or DVD-RW (VR mode) discs is
recommended.
0 Chapters (marks) will not be copied for play list dubbing.
Each scene becomes a chapter.
0 For dubbings to the DVD-RW/-R (Video mode) discs, up to
99 marks per title are copied.
Which discs are unplayable?
Can I use cartridge-enclosed DVD-RAMs?
Can I replace the HDD on my own?
My television is not equipped with video inputs, is
there other methods of connection?
The HDD is functioning although the unit is not on.
The fan is functioning although the unit is not on.
Can I watch programmes via the external receiver even
though the unit is not on?
The time of the clock seems to deviate.
Can I record simultaneously on the HDD and DVD?
If I record to full capacity on the disc, will the old
recordings be erased?
Can I switch the channel while recording is paused?
Cannot activate pause while HDD is recording.
Cannot switch between the main and sub audio after
recording a bilingual programme onto the DVD-R disc.
What happens to the chapter (mark) during recording?
HDD, DVD-RAM,
DVD-RW/-R (VR mode)
DVD-RW/-R
(Video mode)
During
recording
Inserted when switched
from monaural or
bilingual broadcast to
stereo broadcast.
Automatically
inserted
approximately
every 5 minutes.
During
dubbing
Marks will be copied.
Marks will be
copied.
DR-MH300SE.book Page 106 Tuesday, November 22, 2005 5:13 PM