Filter
Top Products
H EN
48
Manual Timer
Programming
(The GUIDE Plus+ System)
A Access the GUIDE Plus+ system.
0 The AGridB area screen will be displayed.
B Select “Schedule”.
C Select “Manual”.
D Set timer recording.
A Set the recording date.
0 Press the Selection Keys (DE) to select, and
(FG) to change.
0 Can also be entered using the Number Keys.
0 Press the Action (GREEN) button for
confirmation.
B Set the recording start time.
C Set the recording end time.
D Set the recording channel.
0 Can also be set from the channel (mosaic)
screen.
E Set a name for the timer programme
settings.
0 The Virtual Keyboard screen will be displayed.
0 To change the character set, press the Action
(YELLOW) button.
ABCDEFGHIJK
9Timer programming can be done by
specifying the date, time and channel as
manual programming settings on the
GUIDE Plus+ system screen.
9
You can programme a maximum of 16
programmes up to 7 days in advance,
including other programmes, within 1 month.
.
........................................................
.
PREPARATION:
0 Load a recordable disc when recording to a DVD
disc. [ P12]
.
........................................................
.
CAUTION:
0 In step D, you can press the Action (RED) button to
return to a previous screen. However, the timer
programme settings will be erased if you return to the
initial AScheduleB screen. Confirm one at a time then
press the button.
STANDBY/ON
A, E
B, D
C, D
Action
(GREEN)
Action
(YELLOW)
Action
(RED)
Number
Keys
F
SELECT
Schedule
Manual
SELECT
Next
05 - Jun
SELECT
CONFIRM
WORLD
B
A
B
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
1
2
3
4
5
6
7
8
9
0
Next
Cursor movement,
backspace & space entry
DR-MH300SE.book Page 48 Tuesday, November 22, 2005 5:13 PM