Filter
Top Products
Masterpage:Left-FullCol
38 EN
Filename [HM-DH5U_Eng.fm]
RECORDING (cont.)
C Watching one program while
recording another
1 Engage TV mode
During recording...
• Change the TV’s input mode from AV to TV.
2 Select channel for viewing
Select the channel you want to watch, on the TV.
D Showing on-screen display
When “SUPERIMPOSE” is set to “ON” (A page 66), you
can see the current VCR status on the TV screen.
•For more detailed information about the on-screen
display, see page 10.
1 Display VCR status on TV screen
The time counter remains on the screen indicating
the elapsed time.
• The indications are not recorded.
2 Exit on-screen display
Press [OSD] again.
NOTES:
• The subtitles does not appear while the on-screen display is
displayed.
• If the VCR is in recording pause mode, “Y” is always
displayed.
• The VCR status can be also displayed during playback.
• Even if “SUPERIMPOSE” is set to “OFF” (A page 66), the on-
screen display appears when the VCR plays back the blank
portion of a tape and the VCR receives the channel which has
no broadcast. However, on-screen display does not appear
when the input location is selected and no signal is input.
D
VCR
TV
CABLE
/DBS
During recording or
recording pause, press
[OSD] on the Remote.
All indications
corresponding to the
current VCR status are
displayed for 5
seconds.
D-VHS
B E
D-VHS STD
12:00 AM
INDEX -9
CH 123HD
SAP STEREO
LR
HM-DH5U_Eng.fm Page 38 Friday, June 25, 2004 11:42 AM