Filter
Top Products
16
Menu Configuration—SET-UP MENU (cont.)
SCHEDULER
Item To do Setting value
PRESENT TIME
Adjust the clock.
• For the setting procedure, see page 17.
PROGRAM SET
Set the Power-on/off Timer for each day.
• For the setting procedure, see page 17.
SUNDAY
MONDAY
TUESDAY
WEDNESDAY
THURSDAY
FRIDAY
SATURDAY
reset
Restore the default setting for “SCHEDULER.”
NETWORK SETTING
Item To do Setting value
MAC ADDRESS
Display the MAC address of the monitor.
IP ADDRESS
Make the network setting to control the monitor from the computer in the local area
network.
• For details, see page 23.
SUBNET MASK
DEFAULT
GATEWAY
DNS SERVER
reset
Restore the default setting for all the items in “NETWORK SETTING.”
CONTROL LOCK
Activates/deactivates the Control Lock. When this function is activated, you cannot operate the monitor with
the buttons on the main unit.
Setting value: OFF, ON
• You can use the remote control and external control while the control lock is set. To release the lock, use
the remote control or the SET-UP MENU button on the main unit.
REFRESH
Item To do Setting value
PIXEL SHIFT
Move picture displayed on the monitor in certain period. OFF, ON
COLOR
REVERSE
Reverse color of the picture displayed on the monitor.
OFF, ON
reset
Restore the default setting for all the items in “REFRESH.”
POWER ON DELAY
Sets the time till the power supply to the monitor’s circuits starts after the power button (POWER ON button
on the remote control or button on the main unit) is pressed.
If you are going to turn several monitors on at the same time, it is recommended to apply different values to
the monitors to control rush current.
Setting value: 0 – 25
• The delay time is about 5 seconds under the setting “25”.
SYNC TERM.
Sets the resistance of sync signal of the RGB IN terminal. Normally, select “HIGH”. If you see pictures
flickering or blurring on the screen because of a long connecting cord, set this to “LOW”.
Setting value: HIGH, LOW
COOLING MODE
Sets the speed of the internal cooling fans. When installing the monitor vertically, select “HIGH.”
Setting value: LOW, HIGH
• Fan A stops when “LOW” is selected.
• Fan B is always in operation while the power is on.
reset
Restores the default setting for all the items in the set-up menu.
all reset
Restores the default setting for all the items in the main menu and set-up menu (except for “LANGUAGE,”
“HOUR METER,” “SECURITY LOCK,” and “PASS ID SETTING”).
Fan B
Fan A
GM-F470S_EN.indd 16GM-F470S_EN.indd 16 08.12.26 10:35:46 AM08.12.26 10:35:46 AM