JVC HD-55G456 Projection Television User Manual


 
49
Initial Setup
Position adjustment allows you to adjust the position of the picture on the screen vertically
when the aspect is set to panorama, cinema or full.
Press the M
ENU button
π
To POSITION ADJUSTMENT
®
To enter
π
®
To adjust the position
Press the M
ENU button to finish
Notes:
To reset the adjustment to the center, press the
O
K button.
• When the arrow disappears, while you are adjusting the position, the position is at its
maximum limit.
• If you select regular size and slim size with aspect or Multi Screen, position adjustment
option is not seen.
• When you change the screen size, perform the position adjustment again.
• Position adjustment allows you to adjust the screen position vertically and horizontally when
the aspect is set Panorama Zoom or Cinema Zoom for 1080i and 720p signals.
Position Adjustment
OPERATE
RESET EXIT
OK
MENU
Power indicator allows you to adjust the brightness of the power indicator
Press the MENU button
π
To POWER INDICATOR
®
To adjust POWER INDICATOR LOW, HIGH
or OFF
Notes :
• When OFF is selected :
The LED disappears if you have a TV signal.
The LED is lit as “LOW” when there is no TV signal.
• When the On Timer turns ON, the LED is lit as
"LOW" when you turn the power off.
• If you set a timer on the TV, the power indicator will light even if the TV is on stand by.
Power Indicator
INITIAL SETUP
SELECT OPERATE EXIT
MENU
NEXT PAGE
PREVIOUS
(2/5)
ON
OFF
NOISE MUTING
FRONT PANEL LOCK
VIDEO INPUT LABEL
POSITION ADJUSTMENT
POWER INDICATOR
HIGH
LCT1928-001A-A ENG 49 8/24/05, 10:10:14 AM