JVC HD-56FC97 Flat Panel Television User Manual


 
56
When you are using a surround system, you can substitute the speaker of this television for
the center speaker of your surround system. Set CENTER CH INPUT to ON when you use the
speaker as the center speaker of your surround system. The volume differs when the TV is
being utilized as the Center Channel Input versus when it is not.
Press the M
ENU button
π
To CENTER CH INPUT
®
To adjust CENTER CH INPUT to ON or OFF
Press the M
ENU button when finished
Note:
• In order to use the CENTER CHANNEL SPEAKER feature, you need a video signal present
as well as sound. Because of that we recommend using this feature for Home Theater setup
only. If there is no video signal present, the TV will be muted.
• There are two different volume adjustment levels, one for regular TV and one for TV used as
a CENTER CHANNEL. Please remember that when switching CENTER CHANNEL mode ON
and OFF in TV menu.
Center CH Input
INITIAL SETUP
SELECT OPERATE EXIT
MENU
NEXT PAGE
PREVIOUS
(1/5)
VIDEO-1 MONITOR OUT
TV SPEAKER
AUDIO OUT
DIGITAL-IN
DIGITAL-IN1 AUDIO
CENTER CH INPUT
OFF
ON
VARI
AUTO
DIGITAL
OFF
HD-56FH97, HD-61FH97, HD-70FH97, HD-56FN97, HD-61FN97, HD-70FN97 ONLY
Onscreen Menus
Use this function when you are receiving a digital broadcast.
Press the MENU button
π
To DIGITAL SETUP
®
To enter
The onscreen will appear
Notes:
• Software Update will only appear when the SD Card
is inserted.
• If you are watching an analog channel, you can still
access the digital setup menu at anytime, while you are doing this, the background screen
will turn blank. In this case, the tuner will switch to digital, since you are accessing the digital
setup menu.
Digital Setup
Select
Back
BACK
Exit
MENU
Operate
PCM
4:3
OFF
Antenna Level
Digital Sound
Aspect Ratio
Cable Card Application
i.LINK Auto Play
Software Update
Digital Setup
LCT2067 Eng.indd 56LCT2067 Eng.indd 56 6/21/06 9:32:22 AM6/21/06 9:32:22 AM