Filter
Top Products
18 EN
The SHOWVIEW timer programming system eliminates the need
to input channel, date, start and stop time data when setting the
timer record function. Simply key in the SHOWVIEW number for
the TV program you wish to record (found in most TV listings)
and the recorder’s timer is automatically programmed.
You have to set "Guide Prog." numbers, which are assigned to
each station for purposes of S
HOWVIEW timer programming, for all
the stations stored in your recorder's memory to get proper
results. If you know the Guide Prog. numbers, perform the
following steps. If not, go to "Guide Prog. Number Set" on page
19.
Before SHOWVIEW setup you must have performed the following
procedures:
● Tuner setting (੬ pg. 4, 30)
● Clock setting (੬ pg. 8)
SHOWVIEW
Setup
[HR-J249EE
only]
TIMER RECORDING
Guide Program Number Set
IMPORTANT
Perform the following procedure after Auto Set Up on page 4
and/or the channel setting steps on pages 30 – 33.
After setting the Guide Program Numbers, channel positions
may be incorrect if you stored or skipped channels. In this case,
re-perform Guide Program Number setting.
MAKE LIST OF STORED
STATION NAMES,
CHANNEL POSITIONS
AND GUIDE PROG NO.
1
(Ex.)
TURN ON THE RECORDER
2
Press .
ACCESS MAIN MENU
SCREEN
3
Press MENU twice.
¶
1
4¢
7
3
8
¡
123
456
7
8
0
9
2
1
3
MENU
2
3
q
6
5
/
8
TV PROG
A Channel B Station C Guide Prog.
position name No.
1ORT 1
2RTR 2
ATTENTION
For a list of Guide Prog. Numbers for Poland, Czech
Republic, Hungary, and Russia, refer to page 21 of the
instruction manual printed in the corresponding language.