Filter
Top Products
47
12
45
3
6
8
0
7
9
2
4
1
3
OK
NOTES:
●
Just Clock (when set to "ON") adjusts the recorder's built-in
clock every hour, except for 23:00, 0:00, 1:00 and 2:00.
●
Just Clock is not effective when . . .
– the recorder’s power is on (unless the recorder is tuned to
the same preset selected in the Clock Set screen).
– the recorder is in the Timer mode.
– a difference of more than 3 minutes exists between the
built-in clock’s time and the actual time.
●
If Just Clock is set to "ON", the recorder’s clock is automati-
cally adjusted at the start/end of Summer Time.
●
Auto clock setting and Just Clock may not function properly
depending on the reception condition.
●
During Manual clock setting, if the day and month data are
invalid (such as 31st April), the month digits are cleared
automatically and the day digits begin blinking. Input the
correct data.
●
If, in step 4 of the Manual clock setting procedure, the year
digits are automatically cleared and the day digits begin
blinking, it is possible that you have input 29th February for a
non-leap year. Input the correct data.
Manual Clock Set
SET DATE AND TIME
4
Press PUSH JOG%fi to set the hour, then press OK.
The “minutes” display begins blinking. Repeat the
procedure to set the minutes, day, month and year.
SET JUST CLOCK
5
The default setting is “ON”. Set as desired by pressing
PUSH JOG%fi, then press OK.
● If you set to “OFF”, you can disregard the next step as
you won’t be able to receive regular clock adjust-
ments.
SET CLOCK DATA SOURCE
PRESET
6
The recorder is preset to receive clock setting and
adjustment data from preset position 1. Press PUSH
JOG%fi to set the preset position to the number
representing the station transmitting clock setting data
(BBC1, BBC2, etc.), then press OK.
START CLOCK OPERATION
7
Press MENU.
SET CLOCK
AUTOMATICALLY
4
At the Clock Set screen,
press PUSH JOG . The
Auto Clock Set screen
appears and clock setting
begins.
● If "TV PR." isn't set to the
preset position on which
Auto Clock Set data is
received, "ERROR"
appears, and then the screen from step 3 reappears.
To set "TV PR.", press OK to place the cursor next to
it, then cycle through the numbers by pressing PUSH
JOG%fi until the number representing the position in
which the station transmitting clock setting data
(BBC1, BBC2, etc.) is stored appears.
RETURN TO NORMAL
SCREEN
5
Once clock setting is completed, press MENU to return
to the normal screen.
Auto Clock Set
%
PUSH JOG
MENU
AUTO CLOCK
PLEASE WAIT
JUST CLOCK: ON
TV PR. : 1