JVC HR-J270EK VCR User Manual


 
25
Receiving NICAM Stereo
And Bilingual Programmes
Your recorder is equipped with a Digital stereo sound
decoder (NICAM), making reception of stereo and
bilingual broadcasts possible.
When the recorder is tuned to a different station, the type
of broadcast being received will be displayed on the TV
screen for a few seconds.
To listen to a stereo programme, press AUDIO until
"HI FI L R" appears on the screen.
To listen to a bilingual programme, press AUDIO until
"HI FI L " or "HI FI R" appears on the screen (as
required).
To listen to the Standard (regular monaural) audio while
receiving a NICAM broadcast, press AUDIO until
"NORM" appears on the front display panel or on the
screen.
NOTES:
The NICAM audio programme will be recorded on the
Hi-Fi audio track, and the Standard audio programme on
the normal audio track.
If the quality of stereo sound being received is poor, the
broadcast will be received in monaural with better quality.
Before playing back a programme recorded in stereo, or a
bilingual programme, refer to "Soundtrack Selection" (See
below).
"O.S.D." must be set to "ON" or the on-screen displays
will not appear (
pg. 33).
Type of Broadcast
On-screen Display
Being Received
Regular Monaural (none)
NICAM Stereo ST NICAM
NICAM Bilingual BIL. NICAM
NICAM Monaural NICAM
?
– –:– –
12
3
4
65
7
8
9
0
2
4
1
3
Selecting The
Sound You
Want
(HR-J670/672EK
only)
Soundtrack Selection
Your video recorder is capable of recording three soundtracks (HI-FI L, HI-FI R and NORM) and will play back the one you
select.
During Playback
Pressing AUDIO on the remote control changes the soundtrack being played back as follows:
TRACK
On-Screen Display
USE
HI FI
For Hi-Fi stereo tapes
L R
HI FI
For main audio of Bilingual tapes
L
HI FI
For sub audio of Bilingual tapes
R
NORM For audio-dubbed tapes
HI FI
For audio-dubbed tapes
NORM
NOTES:
"HIFI L
R" should normally be selected. In this
mode, Hi-Fi stereo tapes are played back in stereo, and
the normal audio track is played back automatically for
tapes with only normal audio.
For instructions on recording NICAM stereo and
bilingual programmes, see above.
Bilingual programmes are not currently broadcast in the
U.K.
"O.S.D." must be set to "ON" or the on-screen displays
will not appear (
pg. 33).
AUDIO