JVC HR-J270EK VCR User Manual


 
53
ENTREE
ANT. IN
ENTREE/DECODEUR
IN/DECODER
AV2
ENTREE/SORTIE
IN/OUT
SORTIE
RF OUT
ANTENNE
AV1
SORTIE
OUT
R
L
AUDIO
CONTROLEUR SAT
SAT CONTROL
(
L-1
)(
L-2
)
1
7
4
5
32
6
1 Mains Power Cord supplies power to recorder.
pg. 5
2 SAT CONTROL Connector enables connection of the
Satellite Controller (provided only for HR-J670/
672EK) for timer recording with a satellite receiver.
pg. 10
3 ANT. IN Connector enables connection of aerial.
pg. 5
4 AV2 (L-2) IN/DECODER Connector enables connec-
tion of satellite receiver, decoder or second recorder;
input recordable when "L-2" selected. pg. 26, 31
REAR VIEW
5 AV1 (L-1) IN/OUT Connector enables AV connec-
tion to TV or second recorder; input recordable when
"L-1" selected. pg. 5, 31
6 AUDIO OUT (L/R) Connectors (HR-J670/672EK
only) enable connection of audio cassette recorder,
TV or second video recorder for dubbing. pg. 37
7 RF OUT Connector enables connection to aerial
terminal of TV receiver. pg. 5
1 B.E.S.T. Picture System Display lights from bottom to
top while B.E.S.T. is active. pg. 22
2 Symbolic Mode Indicators
3 Tape Speed Indicators display mode of recording; light
during Record or Play mode. pg. 14
* EP is only for NTSC playback.
4 Programme Time Indicators show the programme
start time (
) and the programme stop time ( ) for
timer-recording. pg. 18
5 "Timer" Indicator lights when has been pressed to
engage Timer mode. pg. 17, 19
6 Tape Remaining Time Indicator displays time remaining
on tape when certain buttons are pressed. pg. 15
7 Channel Display shows preset position where the
station currently being received is stored.
Clock Display shows current time. pg. 8
8 Instant REVIEW Indicator blinks after timer-recording
and shows how many programmes have been timer-
recorded. pg. 24
9 PDC Indicator lights when PDC has been engaged
for timer recording. pg. 17, 19
* VPS (Video Programme System) recording is not currently
available in the U.K. and not possible with this recorder.
0 VCR Indicator lights when the video recorder is in
the video mode. At this point, the TV automatically
enters AV mode. pg. 12
! "Cassette Loaded" Mark lights once a cassette is
inserted; remains lit until cassette ejected.
@ Counter shows time elapsed since playback or
recording began.
With
displayed, shows time remaining from
current tape position to end of tape ( pg. 15).
Counter, Preset Position*, Clock and Tape Remaining
Time Display appear alternately when – –:– –
(Display) is pressed.
* Preset Position is not displayed during playback.
# Mode shows external input mode selected (L-1, L-2,
SAT* or F-1**).
* When "L-2 SELECT" is set to "SAT" (
pg. 32), "SAT"
appears instead of "L-2".
** F-1 is for HR-J670/672EK only.
REVIEW
SP
9
!
@
#
2 7 81 3 5 64
VPS/PDC
VCR
0
STILL:
SLOW:
RECORD:
RECORD PAUSE:
PLAY:
FF/REW VARIABLE
SEARCH:
DISPLAY PANEL