JVC HR-J6004UM VCR User Manual


 
25
1
2
3
46
7
8
5
0
9
3
78
1
•• ••
¡
Record One Program While
Watching Another
ENGAGE TV MODE
1
During recording...
If using the RF connection ( pg. 4), press TV/VCR.
The VCR's VCR indicator goes out and the TV
broadcast being recorded disappears.
If using the AV connection ( pg. 4), change the
TV's input mode from AV to TV.
SELECT CHANNEL FOR
VIEWING
2
Use the TV’s channel selector to set the channel you
want to watch.
RESET COUNTER TO ZERO
1
Before recording starts, press C.RESET. The counter
resets to zero and displays the exact elapsed time as the
tape runs.
DISPLAY ELAPSED TIME ON
SCREEN
2
During recording, press OSD at any time to see the
elapsed time. All indications corresponding to the
current status of the VCR are displayed for 5 seconds.
The counter display remains on the screen indicating the
elapsed time. Press OSD again to remove the display.
Make sure "SUPERIMPOSE" is set to "ON" ( pg. 17).
The indications are not be recorded.
Recording
Features
Display Elapsed Recording
Time
£
q
5
/
8
2
3
C.RESET
TV/VCR
OSD