Filter
Top Products
29
£
™
q
5
/
8
2
3
1
2
3
46
7
8
5
0
9
3
¶
4¢
78
1
•• ••
¡
MAKE CORRECTIONS
6
To change any of the settings, press OK or PUSH JOG
until the item you want to change begins blinking.
Then set as in step 5.
RETURN TO NORMAL
SCREEN
7
Press MENU as many times as necessary.
● Press just once to access the Auto Timer screen
(੬ pg. 32).
ENGAGE TIMER MODE
8
Press TIMER. The VCR turns off automatically.
PUSH JOG
MENU
OK
MENU
OK
PUSH JOG
EXAMPLE
If you program the VCR to timer
record a show on September 6
on channel 40 from 12:00 noon
to 1:00 PM in SP mode, the
screen will look like this:
PROGRAM 1
DATE 9/ 6 SAT
START 12:00 PM
STOP 1:00 PM
CHANNEL 40 SP
PRESS NUMBER KEY(0-9)
OR (5,∞), THEN (OK)
PRESS (MENU) TO END
%
%
NOTES:
●
To disengage the timer before recording starts, press TIMER
again. Pressing once more re-engages it.
●
In case of a power failure after programming, the VCR’s
memory backup keeps your selections (if the lithium battery is
not exhausted).
●
If you select "PROGRAM SET" without having set the date and
time, an error message appears. Follow its instructions.
●
If you enter a start time that has already passed, ERROR
appears on the screen and flashes.
●
Programs that start after midnight must have the next day’s date.
●
After timer recording is completed, the VCR’s power goes off
automatically.
●
You can program the timer while a regular recording is in
progress; the on-screen menu will not be recorded.
●
If the end of tape is reached during timer recording, the
cassette is automatically ejected.
●
When timer-recording cable or satellite channels through an
external tuner, be sure to keep the Cable Box or satellite
receiver's power ON.
TIMER