Filter
Top Products
26 EN
123
456
7
89
0
1
2
4
3
Express Timer
Programming
Remember, the clock must be set before you can
programme the timer (੬ pg. 10).
Before performing the following steps:
● Insert a cassette with the safety tab in place. The recorder
will come on automatically.
● Turn on the TV and select the VIDEO channel (or AV mode).
● Select the appropriate colour system by pressing the
COLOUR SYSTEM button (੬ pg. 38).
ACCESS TIMER
PROGRAMMING SCREEN
1
HR-J777MS
Press PROG to access the
"G-CODE/SHOWVIEW"
screen, then press START
+/– (If you're just starting
out, "P1" appears).
HR-J677MS
Press PROG (If you're just starting out, "P1" appears).
ENTER PROGRAMME
START TIME
2
Press START +/– to enter
the time you want
recording to start.
● Press and hold START
+/– to move in 30-
minute increments, or
press and release
repeatedly to move 1
minute at a time.
ENTER PROGRAMME STOP
TIME
3
Press STOP +/– to enter the time you want recording to
stop.
● Press and hold STOP +/– to move in 30-minute
increments, or press and release repeatedly to move 1
minute at a time.
ENTER PROGRAMME DATE
4
Press DATE +/–. (The current date appears on screen.
The date you enter appears in its place.)
ENTER CHANNEL
POSITION
5
Press PR +/–.
TIMER RECORDING (cont.)
– P1 –
START STOP
–:– – = –:– –
SP
DATE TV PROG
– –.– – – –
[+/–] =
[PROG] : EXIT
– P1 –
START STOP
21:00 = 22:00
SP
DATE TV PROG
25.04 10
[+/–] =
[PROG] : EXIT
START+/–
DATE+/–
STOP+/–
PROG
COLOUR SYSTEM
– P1 –
START STOP
21:00 = –:– –
SP
DATE TV PROG
– –.– – – –
[+/–] =
[PROG] : EXIT
PR +/–