JVC HR-J758E VCR User Manual


 
EN 35
Satellite Tuner Multi-Brand
Remote Control
Your remote control can operate the basic functions of your
satellite tuner set. In addition to JVC satellite tuners, other
manufacturer’s satellite tuners can also be controlled.
Before you start . . .
Turn on the satellite tuner using its remote control.
SET SATELLITE RECEIVER
BRAND CODE
1
Refer to the chart below. While holding down SAT on the
recorder's remote control, enter your satellite tuner’s
brand code using the NUMBER keys, then press STOP.
Check if the satellite tuner's power goes off as it should.
If it does, try other operations ( step 2)
Once you have set the remote control to operate the
satellite tuner, you don't have to repeat this step until
you replace your remote control's battteries.
Some satellite tuner brands have more than one code.
If the satellite tuner does not function with one code,
try entering another.
OPERATE SATELLITE TUNER
2
First, press SAT to set the remote control to satellite tuner
mode, then press the corresponding button: , TV
PROG +/–, NUMBER keys.
For VIDEOWAY or some brands of satellite tuner, you
must press after having pressed the NUMBER
keys.
The NUMBER buttons may not function with some
satellite tuners.
IMPORTANT
Although the provided remote control unit is compatible with
JVC satellite tuners, as well as many other models, it may not
work with your satellite tuner, or in some instances, may have
limited function capability.
SATELLITE TUNER BRAND CODE
JVC 13, 14
AMSTRAD 01, 02, 03, 04
GRUNDIG 05, 06
HIRSCHMANN 05
SIEMENS 05
WISI 05
KATHREIN 05, 11, 12
PACE 06, 08
PHILIPS 07
FINLUX 09
ITT 09
NOKIA 09
SALORA 09
RFT 10
SKYMASTER 10
MASPRO 11
BT 13
PANASONIC 15
JERROLD 16
VIDEOWAY 17
– –:– –
123
456
7
89
0
2
4
1
3
NUMBER
STOP
TV PROG+/–
VCR
ATTENTION
The remote control can operate not only the video recorder
but also some of your TV and satellite tuner's functions.
To operate your video recorder, first press the VCR button
to set the remote control to the Video mode.
To operate your TV, first press the TV button to set the
remote control to the TV mode.
To operate your satellite tuner, first press the SAT button to
set the remote control to the Satellite tuner mode.
TV
SAT