JVC HR-J758E VCR User Manual


 
48 EN
– –:– –
123
456
7
89
0
2
4
1
3
SUBSIDIARY SETTINGS (cont.)
ATTENTION
After you have stored channels manually, be sure to
perform Guide Program Number Set ( pg. 53) in order to
get proper results from SHOWVIEW timer recording.
NUMBER
Storing Channels Manually
Store channels that were not stored during Auto Set Up ( pg. 4)
or Auto Channel Set ( pg. 46).
SELECT BAND
4
Press %
to change the
band between CH (regular)
and CC (cable), then
press .
INPUT CHANNEL
5
Press the NUMBER keys to input the channel number you
want to store.
Input "0" before any single number entries.
To input the registered station name (ID – pg. 51),
press until "----" (ID setting) begins blinking, then
press
%
.
For fine tuning adjustment, press until "+/–" begins
blinking, then press
%
. While tuning, “+” or “–”
appears.
When storing a channel that sends scrambled
broadcasts, press until "OFF" (Decoder setting)
blinks, then press %fi to set "DECODER" to "ON"
("OFF" is the default setting).
When "AV2 SELECT" is set to "AV2", the "DECODER"
setting cannot be changed ( pg. 37).
ENTER NEW CHANNEL
INFORMATION
6
Press OK and the Confirmation screen appears.
Repeat steps 3 through 6 as necessary.
CLOSE CONFIRMATION
SCREEN
7
Press MENU.
To change positions, see "Change Station Channel
Position" ( pg. 49).
If you wish to set station names other than the ones
registered in your recorder, "Set Stations (B)" on
page 50.
%
%
The blueback screen and the
programme currently being
broadcast by the selected channel
appear alternately for 8 seconds
each.
The blueback screen and the
programme currently being
broadcast by the selected channel
appear alternately for 8 seconds
each.
ACCESS MAIN MENU
1
Press MENU.
ACCESS CONFIRMATION
SCREEN
2
Press %fi to move the highlight bar (pointer) to
“MANUAL CH SET”, then press OK or . The Confir-
mation screen appears.
SELECT POSITION
3
Press %
until an
open position in which
you want to store a
channel begins blinking,
then press OK. The
Manual Channel Set
screen appears.
%
(Ex.) To store in position 12.
%
%
%
%
PR CH ID PR CH ID
01 25 ARD 08 C26 E-SP
02 CDB SKY1 09 55 WEST
03 10 ZDF 10 C24 SAT1
04 C65 RAI1 11 C23 OSF
05 C31 BBC1 12
– –␣ – –
06 C32 BBC2 13
– –␣ – –
07 C33 3SAT 14
– –␣ – –
[5
]
=
: EDIT
= [X] : DELETE
[MENU] : EXIT
PR CH ID FINE DECODER
12 CH01
– –␣ – –
+/– OFF
[
5
] : SELECT
[
] : CURSOR +=
: OK
[MENU] : EXIT
OK
MENU