Filter
Top Products
Masterpage:Left
18
EN
PLAYBACK (cont.)
Variable Speed Search
(including Slow Motion)
During playback, turn the
JOG
dial to the right for
forward variable-speed search, or to the left for reverse
variable-speed search.
OR
During playback, press
w
or
e
repeatedly.
● Each time you press
w or e or each time the
JOG
dial passes a
click position, the playback speed changes. To decrease the
speed during picture search, press the opposite direction
button repeatedly or turn the dial in the opposite direction.
● During still picture, press and hold
e to start forward (or w to
start reverse) slow motion playback. When you release the
button, still picture resumes. During still picture, holding
9 for
more than 2 seconds also starts forward slow motion playback.
If you press
9 again, still picture resumes.
Manual Tracking
Your video recorder is equipped with automatic tracking control.
During playback, you can override this and adjust the tracking
manually by pressing the
PR
buttons.
1
Override automatic tracking.
Press
p
on the remote control.
2
Adjust the tracking manually.
Press
PR
+
or
–
.
● Press
p again to return to automatic tracking.
NOTE:
When a new tape is inserted, the recorder enters the automatic
tracking mode automatically.
Instant ReView
Simply by pressing a single button, the recorder power comes
on, rewinds, and begins playback of the last timer-recorded
programme. If you have several programmes recorded, you can
easily access any of them.
NOTE:
Before starting, make sure that the recorder is off and that the
Timer mode is disengaged.
Activate Instant ReView.
Press
REVIEW
. The recorder power comes on and the
recorder searches for the index code indicating the start
of the last timer-recorded programme. Once it’s found,
playback begins automatically.
● The front display panel tells you how many programmes have
been timer-recorded. If you have, for example, 3 programmes,
the Instant REVIEW indicator and “3” blink. To watch the first
of the 3 programmes, press
REVIEW
three times
. The recorder
searches and begins playback automatically. You can access a
programme as far as 9 index codes away from the current tape
position.
● The number of recorded programmes will not be displayed on
the front display panel after Auto Satellite Programme
Recording (
੬
pg. 31).
To resume normal playback, press
4
.
HRJ780EU1.fm Page 18 Tuesday, December 19, 2000 10:16 AM