Filter
Top Products
Masterpage:Right-NoTitle0
EN
7
Filename [HRS6950EU1-EN.fm]
Page 7 March 5, 2002 2:57 pm
ON-SCREEN DISPLAY
When “O.S.D.” is set to “ON” (
੬
pg. 47), various operational indicators appear on the TV screen.
A
Operation Mode Indicators
B
Tape Speed SP/LP/EP
C
Tape Direction
D
Index MARK Indicator
੬
pg. 22
E
Counter Display
F
Tape Remaining Time Indicator
੬
pg. 23
G
Audio Mode Display
੬
pg. 21
H
Tape Position Indicator
The tape position indicator
appears on the TV screen
when you press
3
or
5
from the Stop mode
or perform an Index Search
(
੬
pg. 20). The position of
“
q
” in relation to “0”
(beginning) or “+” (end)
shows you where you are
on the tape.
NOTE:
Depending on the type of tape being used, the tape position
indicator may not appear correctly.
I
VPS/PDC Indicator
੬
pg. 27, 29
J
Type of Broadcast
੬
pg. 24
K
Current Day/Month/Year
L
Clock Display
M
Channel Position Number and Station Name/
Auxiliary Input Indicator (L-1, L-2, F-1, S-1 or
SAT*)
* When “L-2 SELECT” is set to “SAT” (
੬
pg. 41), “SAT” appears
instead of “L-2”.
N
Timer Warning Display
A warning appears on the TV screen to tell you that the
timer-recording is to start in 5 minutes if you’re not in the
Timer mode at that time. The warning blinks for the entire 5
minutes leading up to the start of timer recording. To clear
the display, press
&
on the remote control.
S-VHS ET Indicator
(S-VHS ET : ON/S-VHS ET : OFF)
੬
pg. 24, 49
O
“Cassette Loaded” Mark
Beginning End
HRS6950EU1-EN.fm Page 7 Tuesday, March 5, 2002 2:58 PM