JVC HR-S7611EU VCR User Manual


 
16 EN
PLAYBACK (cont.)
Playback
Features
JOG
PLAY
PAUSE
SHUTTLE
1 2 3
4 5 6
7 8 9
1
2
3
4
1
2
3
4
– –:– –
0
FF
PLAY
REW
PAUSE
TV PROG
30 SEC
R
e
v
e
r
s
e
R
e
v
e
r
s
e
R
e
v
e
r
s
e
S
l
o
w
P
l
a
y
F
o
r
w
a
r
d
s
e
a
r
c
h
p
l
a
y
s
l
o
w
m
o
t
i
o
n
s
e
a
r
c
h
Still
NOTE:
Refer to the SHUTTLE
ring illustration on the right
as you read the
following procedures.
Still Picture/Frame-By-Frame
Playback
PAUSE DURING PLAYBACK
1
Press PAUSE. If there is vertical jitter, use the TV PROG
buttons to correct the picture.
ACTIVATE FRAME-BY-FRAME
PLAYBACK
2
Turn the JOG dial to the right for forward frame-by-
frame playback, or to the left for reverse frame-by-frame
playback.
OR
Press PAUSE.
OR
Press
@
or
#
.
To resume normal playback, press PLAY.
High-Speed (Turbo) Search
ACTIVATE HIGH-SPEED SEARCH
1
During playback or still, turn the SHUTTLE ring all the
way to the right for forward high-speed search, or to
the left for reverse high-speed search. Releasing
SHUTTLE resumes still picture playback.
For forward high-speed search, turn the SHUTTLE
ring all the way to the right and release it within 1
second.
For reverse high-speed search, turn the SHUTTLE ring
all the way to the left and release it within 1 second.
OR
During playback or still, press FF for forward high-
speed search, or REW for reverse high-speed search.
To resume normal playback, press PLAY.
NOTE:
For short searches, press and hold FF or REW for over 2 seconds
during playback or still picture. When released, normal playback
resumes.
ATTENTION
Picture may not appear during high-speed search with an
LP-recorded tape.
In the high-speed search, still, slow motion or frame by
frame playback mode, the picture will be distorted, and
there will be a loss of colour.
When normal playback resumes from search, still, slow
motion or frame-by-frame playback, the picture may
jitter vertically momentarily depending on the type of TV
being used.