Filter
Top Products
61
1 Mains Power Cord supplies power to recorder.
੬ pg. 5
2 AV1 IN/OUT Connector enables AV connection to
TV or second recorder; input recordable when "L-1"
selected. ੬ pg. 5, 35
3 J Terminal (JLIP (Joint Level Interface Protocol)
Connector) enables connection of a personal
computer or similar device to allow computerized
control of the recorder during editing and certain
other operations. ੬ pg. 40
4 SYNCHRO EDIT Connector enables
connection to camcoder equipped with LANC
connector, for easy editing. ੬ pg. 34
REAR VIEW
DISPLAY PANEL
1 B.E.S.T. Picture System Display lights from bottom to
top while B.E.S.T. is active. ੬ pg. 20
Audio Level Indicator displays audio input and
output levels. ੬ pg. 26
2 Programme Time Indicators show the programme
start time ( ) and the programme stop time ( ) for
timer-recording. ੬ pg. 16
3 Symbolic Mode Indicators
4 "Timer" Indicator lights when ‰ has been pressed to
engage Timer mode. ੬ pg. 15, 17
5 Channel Display shows preset position where the
station currently being received is stored.
Clock Display shows current time. ੬ pg. 8
6 Tape Speed Indicators display mode of recording; light
during Record or Play mode. ੬ pg. 12
* EP is only for NTSC playback.
7 Instant REVIEW Indicator blinks after timer-recording
and shows how many programmes have been timer-
recorded. ੬ pg. 23
8 Audio Mode Indicator displays audio output mode
currently selected. ੬ pg. 27
9 Tape Remaining Time Indicator displays time remaining
on tape when certain buttons are pressed. ੬ pg. 13
0 "Cassette Loaded" Mark lights once a cassette is
inserted; remains lit until cassette ejected.
! PDC Indicator lights when PDC has been engaged
for timer recording. ੬ pg. 15, 17
* VPS (Video Programme System) recording is not currently
available in the U.K. and not possible with this recorder.
@ VCR Indicator lights when the video recorder is in
the video mode. At this point, the TV automatically
enters AV mode. ੬ pg. 10
# Counter shows time elapsed since playback or
recording began.
With displayed, shows time remaining from
current tape position to end of tape (੬ pg. 13).
Counter, Preset Position*, Clock and Tape Remaining
Time Display appear alternately when – –:– –
(DISPLAY) is pressed.
* Preset Position is not displayed during playback.
$ Mode shows external input mode selected (L-1, L-2 or
F-1).
STILL:
SLOW:
RECORD:
RECORD PAUSE:
PLAY:
FF/REW VARIABLE
SEARCH:
AUDIO DUBBING:
AUDIO DUBBING PAUSE:
INSERT:
INSERT PAUSE:
AUDIO DUBBING INSERT:
AUDIO DUBBING INSERT PAUSE:
5 ANT. IN Connector enables connection of aerial.
੬ pg. 5
6 AV2 IN/DECODER Connector enables connection of
satellite receiver, decoder or second recorder; input
recordable when "L-2" selected. ੬ pg. 28, 35
7 AUDIO OUT (L/R) Connectors enable
connection of audio cassette recorder, TV or second
video recorder for dubbing. ੬ pg. 45
8 Remote PAUSE Connector enables connection to
second recorder equipped with R.A. Edit connector,
or to JVC camcorder equipped with Master Edit
Control, for easy editing. ੬ pg. 33
9 RF OUT Connector enables connection to aerial
terminal of TV receiver. ੬ pg. 5
AV1 IN/OUT
AV2 IN/DECODER
ANT. IN
PAUSE
RF OUT
R
L
AUDIO
OUT
JLIP
SYNCHRO EDIT
2 5
6
8 9
1
7
4
3
REVIEW
SP
VPS/PDC
+
8
4
0
6
15dB
NORM
!
09
#
$8
1 5 763 42
VCR
@