Filter
Top Products
16 EN
12
45
3
6
8
0
7
9
RECORDING (cont.)
B.E.S.T. Picture
System
The B.E.S.T. (Biconditional Equalised Signal Tracking) system
checks the condition of the tape in use during recording and
playback, and compensates to provide the highest-possible
recording and playback pictures. Since the default setting is
ON, the B.E.S.T. indicator should light when the recorder power
comes on. If, however, the indicator is off, perform the follow-
ing procedure.
2
2
q
5
/
8
Turn on the TV and select the VIDEO channel (or AV mode).
RECORD
RECORD
OSD ( )
PLAY
TV PROG.
OK
Recording
LOAD A CASSETTE
1
Insert a cassette with the record safety tab intact.
● The recorder power comes on automatically.
ACCESS MODE SELECT
SCREEN
2
Press OSD( ) and the Language screen appears. (To
change the language, ੬ pg. 5) Press OK on the remote
control.
SET B.E.S.T. TO ON
3
Press TV PROG.
∞
to place
the pointer next to
“B.E.S.T.”, then press OK
to set to “ON”.
● The B.E.S.T. indicator
lights.
CLOSE MODE SELECT
SCREEN
4
Press OSD ( ).
START RECORDING
5
Press and hold RECORD and PLAY on the remote, or
press RECORD on the recorder.
● The recorder spends approximately 7 seconds
assessing the condition of the tape, then begins
recording.
O.S.D. : ON
B.E.S.T. : ON
[TV PROG5
∞
] =
:ON/OFF
[OSD] :EXIT
B.E.S.T. indicator