JVC HR-J245EK VCR User Manual


 
54
( AUDIO MONITOR Button changes output
sound mode. pg. 16
(TV Mute) Button mutes sound of con-
nected TV. (See right.)
) WEEKLY Button enables timer recording of
weekly serials. pg. 23, 25
q CANCEL Button erases previously entered data
in on-screen selection menus. pg. 11
C. RESET Button resets counter to 0:00:00.
pg. 19
w SP/LP Button selects tape speed. pg. 18
Auto Tracking Button enables/disables auto
tracking mode during playback pg. 14
e TIMER Button — same as button on recorder.
pg. 23, 25
r DATE +/– Button inputs date of program for
timer recording. pg. 24
t TV PROG. +/– Button — same as button on
recorder. pg. 18
y Fast Forward Button — same as button on
recorder. pg. 12
u Stop Button — same as button on recorder.
pg. 12
i Pause Button — same as button on recorder.
pg. 13
o PUSH JOG %fi Button is used for selection
in on-screen menus. pg. 10
PUSH JOG Button initiates functions such
as Index Search pg. 15, variable-speed
search, frame by frame playback. pg. 13
p TV VOL %fi Button controls volume of con-
nected TV. (See right.)
Installing Batteries
1 Open the battery compartment cover.
2 Insert 2 "AA"-size batteries (provided) in the correct
directions.
3 Replace the cover.
How To Use
The remote control can operate most of your video recorder's
functions, as well as basic functions of JVC TV sets. (See
below.)
Point the remote control toward the sensor window.
The maximum operating distance of the remote control
is about 8 m.
Operating JVC TVs
To operate your TV, while holding down TV, press the
corresponding button: STANDBY/ON
, TV/VCR, TV
PROG. +/–,
(TV Mute). TV VOL. +/– can be used
without holding down TV.
NOTES:
Depending on the type of JVC TV, there may be cases
where some or all functions cannot be operated using the
remote control.
If the remote control doesn't work properly, remove its
batteries, wait a short time, replace the batteries and then
try again.
If for some reason the remote control doesn't work
properly, remove its batteries, wait a short time and then
try again.
%
%
%
%