JVC HR-J260EU VCR User Manual


 
30 EN
123
456
7
89
0
2
4
1
3
?
SUBSIDIARY SETTINGS (cont.)
NUMBER
Storing Channels Manually
Store channels that were not stored during Auto Set Up ( pg.
4), Preset Download ( pg. 6) or Auto Channel Set ( pg. 28).
SELECT BAND
4
Press
%
to change the
band between CH (regular)
and CC (cable), then
press
#
.
INPUT CHANNEL
5
Press the NUMBER keys to input the channel number you
want to store.
Input "0" before any single number entries.
To input the registered station name (ID – pg. 33),
press
#
until "----" (ID setting) begins blinking, then
press
%
.
For fine tuning adjustment, press
#
until "+/–" begins
blinking, then press
%
. While tuning, "+" or "–"
appears.
ENTER NEW CHANNEL
INFORMATION
6
Press OK and the Confirmation screen appears.
Repeat steps 3 through 6 as necessary.
CLOSE CONFIRMATION
SCREEN
7
Press MENU.
To change positions, see "Change Station Channel
Position" ( pg. 31).
If you wish to set station names other than the ones
registered in your recorder, "Set Stations (B)" on
page 32.
The blueback screen and the
programme currently being
broadcast by the selected channel
appear alternately for 8 seconds
each.
The blueback screen and the
programme currently being
broadcast by the selected channel
appear alternately for 8 seconds
each.
ACCESS MAIN MENU
1
Press MENU.
ACCESS CONFIRMATION
SCREEN
2
Press
%fi
to move the highlight bar (pointer) to
"MANUAL CH SET", then press OK or
#
. The Confirma-
tion screen appears.
SELECT POSITION
3
Press
%
@ #
until an
open position in which
you want to store a
channel begins blinking,
then press OK. The
Manual Channel Set
screen appears.
(Ex.) To store in position 12.
PR CH ID PR CH ID
01 25
– – – –
08 C26
– – – –
02 CDB
– – – –
09 55
– – – –
03 10
– – – –
10 C24
– – – –
04 C65
– – – –
11 C23
– – – –
05 C31
– – – –
12
– – – –
06 C32
– – – –
13
– – – –
07 C33
– – – –
14
– – – –
[
5
]
=
: EDIT
= [X] : DELETE
[MENU] : EXIT
PR CH ID FINE
12 CH01
– – – –
+/–
[
5
] : SELECT
[
] : CURSOR +=
: OK
[MENU] : EXIT
OK
MENU