Filter
Top Products
Filename [HRJ261EU1.fm]
Masterpage:Right
EN
9
C
Select the language.
Press
OK
. The Language Set display appears on the front
display panel and/or on the TV screen.
On the front display panel
Press
rt
to select your language code.
(Example) DEUTSCH is selected for SUISSE.
D
Set the date and time.
● When you set the time, press and hold
rt to change the time
by 30 minutes.
● When you set the date, press and hold
rt to change the date
by 15 days.
E
Perform Auto Set Up.
Press
MENU
. The AUTO SET/T-V LINK display appears on
the front display panel and/or on the TV screen.
On the front display panel
Press
rt
to select “Auto” and press
OK
or
e
.
● If you have connected the recorder to your TV via the AV
connection (
੬
pg. 7), the recorder will automatically perform
Preset Download (
੬
pg. 10).
NOTES:
● If there is a power cut, or if you press
1 or MENU while Auto
Set Up is in progress, Auto Set Up will be interrupted; be sure
to turn off the recorder power once and try again from step 1.
● If no sound accompanies the picture or the audio sounds
unnatural on some channels that have been stored by Auto Set
Up, the TV system setting for those channels may be incorrect.
Select the appropriate TV system for those channels
(
੬
pg. 35, “INFORMATION”).
Language Code
ENGLISH
DEUTSCH
FRANCAIS
ITALIANO
CASTELLANO
NEDERLANDS
SVENSKA
:
:
:
:
:
:
:
01
02
03
04
05
06
07
NORSK
SUOMI
DANSK
POLSKI
C
E
c
TINA
MAGYAR
:
:
:
:
:
:
08
09
10
11
12
13
On the on-screen display
Press
rt
to move the
highlight bar (pointer) to the
language of your choice.
Press
OK
. The Clock Set
screen appears. Press
rt
to
set the time, then press
OK
or
e
. The “date” display begins
blinking. Repeat the same
procedure to set the date and
year.
International telephone
country code
Language code
On the on-screen display
Press
rt
to move the
highlight bar (pointer) to
“AUTO SET” and press
OK
or
e
.
“Auto” blinks on the front display panel; do NOT press
any button on the recorder or remote control.
● If you are using the on-screen
display, the AUTO SET
screen will appear. As Auto
Set Up progresses, the “
q“
mark on the TV screen
moves from left to right.
When the Auto Set Up is
completed, “SCAN
COMPLETED” appears for
about 5 seconds, then the
normal screen appears.
ATTENTION
Once you have performed Auto Set Up, even if the recorder’s
memory backup has expired, all the stored stations remain in
the recorder’s memory and the recorder will not perform
Auto Set Up again. You only need to set the clock.
(
੬
pg. 31)
If you have moved to a different area, perform each setting as
required.
● Video channel setting (for RF connection users)
੬
pg. 38
● Tuner setting
੬
pg. 32
● Clock setting
੬
pg. 31
If a new station starts broadcasting in your area, perform
tuner setting (
੬
pg. 32) and, if necessary, video channel
setting (
੬
pg. 38).
Beginning End
HRJ261EU1.fm Page 9 Friday, January 21, 2000 10:18 AM