JVC HR-J347EM VCR User Manual


 
EN 23
Playback
This recorder can play back all 4 types of recorded tape.
VIDEO OUT
AUDIO OUT
RF OUT
RF OUT
SECAM
NTSC
SECAM
PAL
MESECAM
PAL
MESECAM
NTSC
[
PAL
PAL
SECAM
PAL
SECAM
Recorded tape HR-J347EM
Playback circuit
Built-in
RFconverter G, K, I
PAL receiver
SECAM receiver
Multi-system monitor
NOTES:
When viewing NTSC tapes on a PAL TV set:
The picture may shrink vertically with black bars appearing at the top and bottom of the screen. This is not a malfunction on the
part of the video recorder nor the TV.
The picture may roll up or down. This can be corrected using the V-HOLD control found on some TVs. (This cannot be corrected if
the TV does not have a V-HOLD control.)
During search, still, or frame-by-frame playback, the picture will be distorted, and there may be a loss of colour.
ATTENTION:
When this recorder is connected to a multi-system TV, the audio signal may not be heard or may be noisy if the TV's colour
system select switch is adjusted to the AUTO position. In such a case, set the TV's colour system select switch to the appropriate
position which corresponds to the TV system you have selected at the TV System Select screen.
Tape-To-Tape Editing
There are 3 different types of recorded tape, depending on the signal recorded.
Recorded tape Playback equipment HR-J347EM Dubbed tape
Recording circuit
PAL
MESECAM
PAL
MESECAM
SECAM
SECAM
PAL
MESECAM
PAL
MESECAM