Filter
Top Products
Press SET –/+ on the Remote to
select a channel number you
want to add or delete.
To add channels
Press ENTER until “ADD” appears on the screen to set to
add the unmemorized channel.
To delete channels
Press ENTER until “DELETE” appears on the screen to set
to delete the channel from memory.
Repeat to to add or delete other channel.
Press MENU three times to return to normal screen.
– TV/CATV Selection
Access Menu screen, then CH
Set Up screen
Press MENU on the Remote. Press
SET –/+ to select “CH SET UP”, then
press ENTER.
Setting channels automatically
– Auto Channel
Memory
The VCR can receive a maximum of
181 channels by presetting the
channels into memory.
Access Menu screen, then CH
Set Up screen
Press MENU on the Remote. Press
SET –/+ to select “CH SET UP”, then
press ENTER.
Perform Auto
Channel
Memory
Press SET –/+ to select “AUTO CH
MEMORY”, then press ENTER.
Complete Auto Channel
Memory
The auto tuning will start. The
channel display will count up and
when finished, the screen returns to
normal.
– Initial Settings –
Tuner Setting
This VCR is equipped with a channel memory feature which
allows channels to skip up or down to the next channel set
into memory, skipping over unwanted channels. Before
selecting channels, they must be programmed into the VCR’s
memory. In addition to normal VHF and UHF channels, this
VCR can receive up to 113 Cable TV channels. To use this
VCR with an antenna, set the TV/CATV menu option to the
TV mode. When shipped from the factory, this menu option
is in the CATV mode.
〈
+
/
–
/ENTER/MENU
〉
CH SET UP
TV CATV
AUTO CH MEMORY
ADD/DELETE
CH 001
〈+/—/ENTER/MENU〉
MENU
CLOCK SET
TIMER REC SET
ON OFF
AUTO REPEAT
CH SET UP
LANGUAGE/IDIOMA/LANGUE
ON OFF
NO NOISE BACKGROUND
Setting channels manually
– Manual Channel Set
You can add the channels you want or delete the channels
you do not want manually.
〈
+
/
–
/ENTER/MENU
〉
CH SET UP
TV CATV
AUTO CH MEMORY
ADD/DELETE
CH 012
〈
+
/
–
/ENTER/MENU
〉
ADD
〈+/—/ENTER/MENU〉
MENU
CLOCK SET
TIMER REC SET
ON OFF
AUTO REPEAT
CH SET UP
LANGUAGE/IDIOMA/LANGUE
ON OFF
NO NOISE BACKGROUND
1
2
3
1
2
Press MENU twice to return to normal screen.
〈
+
/
–
/ENTER/MENU
〉
CH SET UP
TV CATV
AUTO CH MEMORY
ADD/DELETE
〈+/—/ENTER/MENU〉
MENU
CLOCK SET
TIMER REC SET
ON OFF
AUTO REPEAT
CH SET UP
LANGUAGE/IDIOMA/LANGUE
ON OFF
NO NOISE BACKGROUND
TV - VHF/UHF channels
CATV - CABLE TV channels
Perform TV/CATV Selection
Press SET –/+ to select “TV/CATV”,
then press ENTER to select the TV
or CATV mode. The arrow indicates
the selected mode.
1
2
Add or Delete desired channels
3
Access ADD/DELETE Mode
Press SET –/+ to select “ADD/
DELETE”, then press ENTER.
Access Menu screen, then CH
Set Up screen
Press MENU on the Remote. Press
SET –/+ to select “CH SET UP”, then
press ENTER.
1
2
3
1 2
NOTE: You can’t select “CH SET UP” if you set the channel
to “L”.
4F12701AE Cov-07 30/1/03, 5:05 PM6