Filter
Top Products
18
G-Code Timer
Programming
TIMER RECORDING (cont.)
Before performing G-Code timer recording, be sure to read
"G-Code Setup" (੬ pg. 16).
Before performing the following steps:
● Insert a cassette with the safety tab in place. The recorder will
come on automatically.
● Turn on the TV and select the VIDEO channel (or AV mode).
q
6
5
/
8
2
3
123
456
789
0
SP/LP
CANCEL
PROG.
TIMER
WEEKLY
OK
DAILY
G – CODE
[0–9] =
[PROG./CLOCK] :MENU
ACCESS G-CODE SCREEN
1
Press PROG.
ENTER G-CODE NUMBER
2
Press the appropriate
NUMBER keys to enter the
G-Code number.
● If you made a mistake,
press CANCEL and enter
the correct G-Code
number.
CHECK INPUT DATA
3
Press OK on the remote
control. The G-Code
Programming screen
appears.
● If the G-Code number
you entered is incorrect,
"ERROR" will be
displayed on the screen.
Press CANCEL and enter the correct G-Code number.
SET TAPE SPEED
4
Press SP/LP.
RETURN TO NORMAL
SCREEN
5
Press OK.
● Repeat steps 1–5 for each additional programmes.
ENGAGE TIMER MODE
6
Press TIMER.
To Delay The Stop Time . . .
. . . press ADD after pressing OK in step 3. Each time you press,
the Stop time is delayed by 5 minutes (meaning that 5 minutes
of recording time is added). You can easily compensate for
anticipated programme schedule delays this way.
To Timer-Record Weekly Or Daily Serials . . .
. . . after pressing OK in step 3, press WEEKLY (NUMBER key
“9”) for weekly serials or DAILY (NUMBER key “8”) for daily
serials (Monday–Friday).
G – CODE
12345678
[0–9] =
– P 1 –
G–CODE 12345678
START STOP
21:00 = 22:00
WEEKLY SP
DATE TV PROG.
25. 12 29
:OK
NUMBER
ADD