9
q
6
5
/
8
2
3
Clock Set
123
456
789
0
Turn on the TV and select the VIDEO channel (or AV mode).
NOTE:
If, in step 7, the year digits are automatically cleared, it is
possible that you have input 29th February for a non-leap year.
Input the correct data.
OPERATE
NUMBER5∞
CLOCK
OPERATE
TV PROG.
OK
Use the buttons on the remote control for this procedure.
TURN ON THE RECORDER
1
Press OPERATE.
ACCESS MODE SELECT
SCREEN
2
Press CLOCK.
● If the "G-CODE" screen appears, press CLOCK again.
SELECT MODE
3
Press TV PROG.5/∞ to
place the pointer next to
"CLOCK SET", then press
OK. The Clock Set screen
appears.
SET TIME
4
Use NUMBER key "1(5)"
or "4(∞)" to set the time.
● Press and hold either
button to delay or
advance the time by 30
minutes.
SET DATE
5
Use NUMBER key "2(5)" or "5(∞)" to set the date.
● Press and hold either button to change the date by 15
days.
SET YEAR
6
Use NUMBER key "3(5)" or "6(∞)" to set the year.
RETURN TO NORMAL
SCREEN
7
Press CLOCK.
To Make Corrections
Perform steps 1 – 3 to call up the Clock Set screen, use
NUMBER keys "1" – "6" to make the correction, then press
CLOCK.
CLOCK SET
TIME DATE YEAR
0:00 01:01 00
[1 – 6]
[PROG./CLOCK] :EXIT
TIMER PROGRAMMING
CLOCK SET
[TV PROG5
∞
] =
[CANCEL] :EXIT