Filter
Top Products
28 EN
TIMER RECORDING
You can directly program the VCR’s timer to record up to 8
shows, as far as a year in advance. Remember, the clock must be
set before you can program the timer (੬ pg. 7 or 9).
On-Screen
Timer
Programming
LOAD A CASSETTE
1
Make sure the record safety tab is intact. If not, cover
the hole with adhesive tape, then load.
● The VCR comes on, and the counter is reset,
automatically.
ACCESS ON-SCREEN
MENU
2
Press MENU.
ACCESS PROGRAM SET
SCREEN
3
Make sure the highlight bar (arrow) is on "PROGRAM
SET", then press OK.
SELECT PROGRAM NUMBER
4
Press the appropriate
NUMBER keys or CH5
∞
or
SHUTTLE PLUS %
fi
to
select a vacant program
number, then press OK. The
first time you set the timer
programming function, all
the program numbers will
be blank; in this case just
press OK when the Program Set screen appears.
SET PROGRAM
INFORMATION
5
Press the appropriate NUMBER keys to set the date,
start/stop time and channel number. Press CH5
∞
or
SHUTTLE PLUS %
fi
to set AM/PM and tape speed (SP
or EP). Press OK after AM/PM, channel number and
tape speed settings.
● Any information comprised of 1 digit (except the
channel number) should have a "0" entered before it.
● It is possible to set all information using the CH
5
∞ or
SHUTTLE PLUS
%
fi
button.
(In this case, press OK after each setting.) Do not use
the CH ∞ or SHUTTLE PLUS fi button to set the date.
● At the Program Set screen, the setting that can be set
blinks. When setting of a highlighted item is completed,
the highlight bar moves down by 1 line to the next item.
NOTE:
If you are using a cable box, enter the cable box
channel, not the channel to be recorded. The channel
to be recorded must be selected on the cable box. (The
cable box channel is the VCR's channel that displays
the channels received by the cable box.)
**You can record selected programs at the same time
every weekday, or once a week. Before entering the
month, press NUMBER key “8” (DAILY) or “9”
(WEEKLY). Either "DAILY" or "WEEKLY" appears.
Press again and "DAILY" or "WEEKLY" disappears.
For weekly recording, the desired date for the day of
the week must be entered.
Turn on the TV and select the VCR channel 3 or 4 (or AV
mode).
3
¶
4¢
78
1
¡
1
2
3
456
7
8
0
9
2
2
q5
/
8
6
OK
MENU
MENU
OK
CH
CH
SHUTTLE PLUS
NUMBER "8"
NUMBER "9"
NUMBER
PROGRAM 1
DATE – –/– –
START – –:– – AM
STOP – –:– – AM
CHANNEL – – SP
PRESS NUMBER KEY (O–9)
OR (5,∞), THEN (OK)
PRESS (MENU) TO END